A damage-free method

Graceful Garlands Without a Nail

Start with hardware that never touches the paint. Use adhesive hooks only when you can follow the official steps — including the removal step most people skip.

A gracious room does not require a single nail. The most lasting holiday hangings rest in a doorway, hang over a door, or clip to the glass — and leave the paint untouched.

Methods that never touch the wall

These are the most deposit-safe options, and they are usually enough for a doorway, window, or banister:

  • A tension rod in a window or doorway. Rest the rod in the frame, then tie or hook garland, ribbon, and a light string to the rod. Nothing sticks to the paint. This is also easy to take down and store as one piece, or to redo next year.
  • An over-the-door wreath hook. It hangs from the top of the door, so you do not need a nail or an adhesive hook on the door face. Make sure the hook does not scrape the door or the frame when the door opens, and that it does not keep the door from closing.
  • Suction-cup clips on glass. For lights in a window, clips that attach to the glass avoid the wall altogether. Clean the glass, and use clips meant for lights rather than a random hook that can drop.
  • Tie-on garland on a banister. Use ribbon, twine, or floral wire you can cut off later. Do not staple or nail into a railing you do not own.
  • Existing curtain rods and shelves. S-hooks or ribbon on a rod you already have will hold lightweight garland or ornaments without a new hole.

If a method needs a wall, prefer a surface that is already finished and easy to clean, such as a window frame you have tested, rather than textured or freshly painted drywall.

Start with hardware that never touches the paint.

If you use adhesive hooks

Adhesive hooks can work on many rental walls, but they fail in predictable ways: a dirty surface, a textured wall, hanging weight too soon, using an indoor strip outside, or pulling the tab out from the wall when it is time to come down. The Command™ Brand instruction and FAQ pages, checked on 2026-11-21, say the following. Always follow the package in your hand if it differs.

Do

  • Wait at least 7 days after painting before use
  • Wipe the surface with rubbing alcohol and let it dry. Do not use household cleaners or water
  • Choose a hook rated for the weight, and stay at or under that limit
  • Use indoor hooks indoors and outdoor hooks outdoors (indoor strips have red liners; outdoor strips have blue liners)
  • Press firmly for 30 seconds, then wait 1 hour before hanging anything
  • For string lights, use light clips or decorating clips made for cords

Do not

  • Use them on wallpaper, brick, rough concrete, or heavily textured walls
  • Hang items over beds, or hang valuable or irreplaceable items
  • Use indoor products on exterior windows
  • Add extra strips to “increase” the weight limit — the official FAQ says that does not always work and can cause a fall
  • Reuse a strip. Strips are one-time use; hooks can often be reused with a fresh matching strip

Indoor hooks are listed for 50°F to 105°F; outdoor hooks for -20°F to 125°F, with UV- and water-resistant adhesive. For wreaths or garland outdoors, the FAQ says to use outdoor hooks rated for the weight.

Apply, in order (most indoor hooks)

  1. Clean the wall with rubbing alcohol and let it dry.
  2. Remove the blue or red liner and press the strip firmly to the back of the hook.
  3. Remove the black liner and press the hook to the surface firmly for 30 seconds.
  4. If it is a two-piece hook, slide the hook off the back plate, press the base firmly for 30 seconds, then slide the hook back on.
  5. Wait 1 hour before hanging lights or garland.

Clear outdoor hooks are different: the official page says to put the strip on the window first (remove the black liner, press 30 seconds), then add the hook (remove the blue liner, press 30 seconds). If you have those clips, follow that order, not the indoor order above.

How to take them down without peeling paint

This is the step that protects your deposit. The official removal instructions are:

  1. Hold the hook or back plate gently in place with one hand.
  2. Never pull the strip toward you. Always pull straight down.
  3. Stretch the strip slowly against the wall at least 12 inches to release it.

The official FAQ says paint can come off if the paint was weak, old, uncured, or damaged, or if the strip was pulled out instead of straight down. If the tab breaks, do not yank the hook off the wall. The FAQ’s broken-tab steps include stretching any remaining strip if you can reach it, using dental floss or string to saw through leftover adhesive, and, if needed, warming the base plate with a hair dryer to soften the adhesive before using floss.

If your walls are heavily textured, or the paint already looks fragile, skip adhesive hooks and go back to tension rods, door hooks, or glass clips.

Light safety

The U.S. Consumer Product Safety Commission’s current holiday safety page, checked on 2026-11-21, tells people never to string together more than three sets of incandescent lights and never to overload electrical outlets. It also says never to leave burning candles unattended, and to use flameless candles whenever possible. Use lights that are rated for the place you are putting them (indoor sets stay indoors). Turn lights off when you leave or go to sleep, and throw out any set with damaged sockets or frayed wires.

How this page was checkedChecked against official instructions or sources on 2026-11-21. Not a product test, and not a guarantee for every wall or lease. When a method depends on a product or a safety rule, we open the official instructions or agency page, record what it actually says, and date that check. We do not pretend to have tested every hook on every kind of paint. Leases, wall conditions, and product lines change. Follow the package in your hand, and check your lease before you hang anything.